Proofed first
LIVE PRODUCTCategory
Ontario School Bus Operator Name & Fleet ID Lettering Kit
Customer-specified fleet identification for Ontario school buses: your operator or board name and your bus/unit IDs, cut to order and proofed before production.
Commercial TruckingO.Reg 424/97 · FMCSA 49 CFR 390.21
Part of the commercial trucking collection — related markings and kits for the same requirements, grouped in one place.
FROM
$149.99 CAD
VINYL RATING
Outdoor vinyl
DELIVERY
Canada-wide
●PRIVATE CANADIAN SUPPLIER
Pictured: Ontario School Bus Operator Name & Fleet ID Lettering Kit.
Build and approve prooffrom $149.99
36 live ordering options
Exact input rendered live
Buyer approval releases proof
Made to order in Canada
Your sign, exactly as it prints
Your sign1 Bus Set / Standard Kit / Standard Black
YOUR ID
Supplemental custom identification
Your on-page approval is the production proof for this deterministic text order. Check every character before checkout.
Configure from current product options
Ontario School Bus Operator Name & Fleet ID Lettering Kit
Capture the production details needed before checkout.
Order Size: 1 Bus Set | Kit Type: Standard Kit | Finish: Standard Black$149.99 CAD
Complete: Operator Name, Bus Id, Body Colour, Special Instructions.
The exact spec you approved here travels with your order — nothing gets re-typed or re-entered.
Product details
Customer-specified fleet identification for Ontario school buses: your operator or board name and your bus/unit IDs, cut to order and proofed before production. This is fleet ID lettering you specify — not a government identifier, statutory package, Ontario regulator approval, or certification.
Standard Kit — $149.99 CAD per bus
2 operator-name decals (max 36"W x 6"H each), 2 bus/unit-ID decals (max 12"W x 5"H each), pre-spaced transfer tape, 1 felt-edge squeegee, 1 placement and measurement guide, 1 digital proof, and a saved production reference for reorders.
Full Kit — $219.99 CAD per bus
2 side operator-name decals (36"W x 6"H each), 2 side bus/unit-ID decals (12"W x 5"H each), 1 rear operator-name decal (24"W x 5"H), 2 front/rear unit-number decals (8"W x 4"H each), 1 spare unit-number decal (8"W x 4"H), plus transfer tape, felt-edge squeegee, placement guide, digital proof, and a saved reorder reference.
Large-format upgrade — +$79.99 CAD per bus
For long operator or board names. Bumps the maximum bounding areas: side operator-name 48"W x 8"H each, side unit-ID 16"W x 6"H each, rear operator-name 30"W x 6"H, front/rear unit-ID 10"W x 5"H each. These are production bounding areas, not universal legal dimensions.
Fleet packs — 5 and 10 buses
5-bus Standard $649.99, 5-bus Full $949.99, 10-bus Standard $1,199.99, 10-bus Full $1,749.99. Each pack is N complete kits: individually labelled vehicle packages, one master fleet proof, N squeegees, a saved fleet reorder reference, and up to N different unit IDs. Different buses are collected through the structured fleet intake — not through quantity.
Who this is for
School-bus operators, school boards, transport contractors, bus dealers, body shops, and fleet managers who need consistent, reorder-ready fleet identification. Statutory safety markings are a separate product — see the Ontario School Bus Safety Marking Replacement Kit linked below.
Product specifications
- Standard operator-name decal
- max 36"W x 6"H each (x2)
- Standard unit-ID decal
- max 12"W x 5"H each (x2)
- Full Kit rear operator-name
- 24"W x 5"H (x1)
- Full Kit unit-number
- 8"W x 4"H (x2 + 1 spare)
- Large-format side operator-name
- max 48"W x 8"H each
- Large-format side unit-ID
- max 16"W x 6"H each
- Large-format rear operator-name
- max 30"W x 6"H
- Large-format unit-ID
- max 10"W x 5"H each
- Finishes
- Standard Black, Black + White Reflective outline, White Reflective + Black outline
- Included
- Transfer tape, felt-edge squeegee, placement guide, digital proof, saved reorder reference
Important scope
This kit is customer-specified fleet identification lettering. It is not a government identifier, a statutory safety-marking package, an Ontario regulator approval, or a certification of any kind. The customer verifies the wording, unit numbers, measurements, and placement requirements for their own vehicles and jurisdiction before ordering. Statutory school-bus safety markings are sold separately. Production begins only after proof approval.
Related products
- Proudly made in Canada, designed for Ontario's climate.
- Durable, weather-resistant materials that last for years.
- Fast turnaround: most kits ship within 24 hours.
- Dedicated customer support to help with any questions.
Product gallery
5 images
REG-COND · Conditionally regulated
The answer in 20 seconds
Ontario School Bus Operator Name & Fleet ID Lettering Kit can be ordered from the current options and CAD prices on this page. The required order details and proof decision travel with checkout.
Required if the displayed source conditions apply; may not apply if an exception or different jurisdiction governs.
Source-checked authority
Commercial Trucking product authority snapshot
| Specification | Requirement | Primary reference |
|---|---|---|
| Rear no-passing sign (school buses) | Regulated marking under Ontario's school-bus regulation when applicable; this kit's operator-name lettering does not replace it | O. Reg. 612 (School Buses) |
| Accessibility symbol, minimum 15 cm x 15 cm (accessible buses) | Required on accessible school buses when applicable | O. Reg. 612 (School Buses) |
| Operator name and fleet-identification lettering | Customer-specified fleet identification. The current public text of O. Reg. 612 does not state a universal size or placement rule for operator-name lettering; confirm any school board or operator contract specifications | O. Reg. 612 reviewed 2026-07-25 |
Last verified Jul 25, 2026 against Primary source.
Questions buyers ask
Is this a government or MTO approval kit?
No. This is customer-specified fleet ID lettering — your operator or board name and your bus/unit IDs cut to order. It is not a government identifier, statutory package, MTO approval, or certification. The customer verifies their own wording, measurements, and placement requirements.
What is the difference between the Standard and Full kits?
Standard ($149.99) covers the two sides: 2 operator-name decals (max 36"W x 6"H) and 2 unit-ID decals (max 12"W x 5"H). Full ($219.99) adds the rear operator-name (24"W x 5"H), 2 front/rear unit-numbers (8"W x 4"H), and 1 spare unit-number.
When do I need the large-format upgrade?
When your operator or board name is long. For +$79.99 per bus the maximum bounding areas increase: side operator-name to 48"W x 8"H, side unit-ID to 16"W x 6"H, rear operator-name to 30"W x 6"H, and unit-IDs to 10"W x 5"H. These are production bounding areas, not universal legal dimensions.
How do fleet packs work for 5 or 10 buses?
Each pack is N complete kits with individually labelled vehicle packages, one master fleet proof, N squeegees, a saved fleet reorder reference, and up to N different unit IDs. Bus IDs are collected through the structured fleet intake, not through order quantity.
Are statutory school-bus safety markings included?
No. Statutory safety markings (rear signs, accessibility symbols, wording replacements) are a separate product: the Ontario School Bus Safety Marking Replacement Kit, linked on this page.
When does production start?
Only after you approve the digital proof. Every kit ships with pre-spaced transfer tape, a felt-edge squeegee, and a placement and measurement guide.
Ordering comparison
| Decision | This school bus fleet ID kit | Quote-based sign order |
|---|---|---|
| Order path | Choose the live bus count, kit type and finish, then submit operator name, bus ID and fleet notes through guided order form. | Confirm which details are collected online and which require a separate phone or email quote. |
| Proof and order record | The customer-specified wording is proofed before production and the selected configuration stays attached to the order. | Confirm when a proof is supplied and how approved text is recorded for repeat fleet orders. |
| Regulatory role | Operator-name and bus-ID fleet identification only; statutory school-bus safety markings and vehicle certification remain separate. | Confirm the legal role and source for every marking before treating a custom decal as a required safety display. |
| Mixed-age fleets | Fleet intake records the customer details, while manufacture-date-specific safety wording remains outside this product unless separately verified and ordered. | Confirm whether the provider checks each bus manufacture date before supplying regulated safety wording. |
Customer reviews
This product does not have a published customer rating yet. We only publish ratings from real customer reviews. Use the source-checked specifications, product images, live options, and proof-before-production process to decide.
Complete the job
Related compliance products
Proofed first
Proofed first
Proofed first
Compliance Decal Installation Kit - Transfer Tape + Felt-Edge Applicator
Ships across Canada
From
$24.99