Aircraft Tail Number Decals | Transport Canada
Regulation-grade aircraft registration mark lettering for Canadian operators. Cut fast from Port Colborne on 5+ year outdoor vinyl — ships before 2 PM.
Configure Your Lettering
Enter your details below. Our builder validates your input against Canadian regulations in real-time.
Regulatory Requirements
Required under CARs Standard 222. All Canadian-registered aircraft must display C-FXXX or C-GXXX registration marks. Transport Canada conducts ramp inspections — unmarked aircraft may be grounded.
Canadian aircraft registration: C- followed by F or G and 3 letters. Found on your Certificate of Registration.
We confirm your text and layout before cutting. No payment until you approve your proof.
Transport Canada Aircraft Registration Marking Requirements
Every Canadian-registered aircraft must display its registration marks (C-GXXX or C-FXXX) on the fuselage per Canadian Aviation Regulations (CARs) Part III, Standard 222. Missing or illegible marks ground your aircraft at inspection. Transport Canada enforcement officers verify marks during annual airworthiness inspections and ramp checks.
Regulatory Snapshot — CARs Standard 222
| Specification | Requirement | Legal Reference |
|---|---|---|
| Mark format | C-G or C-F prefix + 3 letters | CARs 222.01 |
| Letter height | Minimum 30 cm (12 inches) on fuselage | CARs Standard 222.01(1)(a) |
| Colour contrast | Must contrast sharply with background | CARs Standard 222.01(3) |
| Placement | Both sides of fuselage or vertical tail surface | CARs Standard 222.01(1) |
| Durability | Must remain legible throughout service life | CARs 222.01(4) |
What You Get
Each kit includes precision-cut aircraft registration mark decals sized to CARs specifications. Our production team cuts every set using industrial precision equipment for clean, sharp edges that look professional from any distance. Each order ships with decals, transfer tape, a squeegee, and illustrated application instructions.
Materials and Durability
Our decals use 7-Year outdoor-rated premium vinyl with UV-resistant inks. Built to survive direct sun exposure, rain, temperature swings from -40°C to +50°C, and the high-altitude UV conditions that fade cheaper materials in a single season. The adhesive bonds permanently to painted aluminum, composite, and fabric surfaces. Made in Canada at our Port Colborne, Ontario facility.
Who Needs This
- Private aircraft owners (Cessna, Piper, Diamond, Beechcraft)
- Flying clubs and flight schools
- Commercial operators and charter companies
- Aircraft maintenance and repair organizations (AMOs)
- Homebuilt and ultralight aircraft owners
Our Kit vs. Paint Shop vs. DIY
| Factor | Compliance Lettering Kit | Paint Shop | DIY Stencil |
|---|---|---|---|
| Turnaround | Ships same day before 2 PM | 1-2 weeks minimum | Depends on skill |
| CARs-compliant sizing | Yes — 12" and 18" per Standard 222 | Usually yes | Must measure yourself |
| Cost | $119.99 – $179.99 | $500 – $1,500+ | $50 + your time |
| Removable for repaint | Yes — clean removal | No — requires sanding | No |
| Material durability | 7-Year outdoor vinyl | Permanent paint | Varies widely |
| Made in Canada | Yes — Port Colborne, ON | Varies | N/A |
Application Tips
Clean the application area with isopropyl alcohol. Apply in a hangar or sheltered area above 10°C (50°F). Use the included squeegee to push out air bubbles. Allow 24 hours before flight for full adhesive cure. For fabric-covered aircraft, consult your AMO about surface preparation.
Related Compliance Products
- Drone Registration Number Decals — Transport Canada RPAS markings
- Boat Registration Numbers Canada — Transport Canada marine vessel markings
- Aviation Compliance Collection — all aircraft marking products
Regulations last verified: March 2026 — Transport Canada CARs
Built to Last: 7-Year outdoor-rated premium vinyl. Survives Canadian conditions, UV exposure, and high-altitude flight. Made in Canada.
Ready to order? Call 289-228-7021 or add to cart above. Free design help included.
Frequently Asked Questions
Transport Canada CARs Part III Subpart 2 (Standard 222) requires registration marks to be at least 30 cm (12 inches) high on fixed-wing aircraft. Helicopters and other aircraft have specific requirements based on category. Letters must be in a colour that contrasts with the background.
Regulations last verified: March 2026
Sources: CARs Std 222 · CARs Part IX
Checked quarterly against latest Transport Canada and MTO updates.
Applicable Regulations
All Canadian-registered aircraft must display C-FXXX or C-GXXX registration marks on fuselage.
All drones 250g–25kg must display registration number, legible from 30cm, on the aircraft.
Free tool — verify your vinyl colour meets MTO high-contrast requirements before ordering.
Technical Specifications
| Compliance Type | Aircraft Registration Mark |
| Minimum Height | 3" |
| Maximum Width | 48" |
| Default Typeface | Oswald |
| Required Format | Canadian aircraft registration: C- followed by F or G and 3 letters. Found on your Certificate of Registration. |
| Vinyl | premium-outdoor-vinyl |
| Outdoor Rating | 5+ years UV / weather resistant |
| Application | Self-adhesive, wet or dry application |
| Production | Fast turnaround, ships from Ontario |
| Compliance | Transport Canada / MTO validated |
Regulation Change Alerts
Get notified when Transport Canada or MTO changes lettering requirements. Free. No spam. Unsubscribe anytime.
CASL compliant. We only send regulation updates. Unsubscribe link in every email.