27 Free Compliance Guides — Every province, every regulation, cited to official sources
Regulation Compliant
SOR/2025-272 · Small Vessel Regulations · Effective 2025

Your Boat Licence Is Expiring

Transport Canada killed lifetime pleasure craft licences. 2.5 million boats must renew on a rolling 5-year schedule — and Wave 1 expires March 31, 2026.

When Does YOUR Licence Expire?

SOR/2010-91 Section 106 established a rolling expiry schedule based on when your PCL was originally issued:

Licence IssuedExpiry DateStatus
Before Dec 31, 1974March 31, 2026⚠️ 23 DAYS
Jan 1, 1975 – Dec 31, 1985December 31, 202610 months
Jan 1, 1986 – Dec 31, 1995December 31, 2027Sailboat expansion year
Jan 1, 1996 – Dec 31, 1999December 31, 2028
Jan 1, 2000 – Dec 31, 2005December 31, 2029
Jan 1, 2006 – Apr 28, 2010December 31, 2030

Licences issued after April 28, 2010 already follow the 5-year cycle and expire on the date printed on your licence.

Source: Small Vessel Regulations (SOR/2010-91) on Justice Laws

What Transport Canada Says

SOR/2010-91 amended by SOR/2025-272: 5-year renewal cycle

s.105

$24 renewal fee (CPI-adjusted annually on April 1)

s.107

30-day address update window when you move

s.108

$250 fine for operating with invalid/expired licence

s.401

Hull markings must be updated if licence number changes

s.112

PCL numbers must be minimum 75mm (3 inches) height, block characters, contrasting colour, both sides of bow

s.112(1)

What the Government Site Doesn't Tell You

Transport Canada explains the law. We explain what to actually DO.

Do I need new numbers on my hull?

If your PCL number changes on renewal — yes, you need new hull markings immediately. Even if your number stays the same, check the condition of your existing markings. Numbers applied 20-50 years ago are likely faded, peeling, or undersized by current standards. Faded markings that can't be read from 100 metres are non-compliant regardless of the number being correct.

What size do my numbers need to be?

Minimum 75mm (3 inches) in block characters. This is larger than most people think — about the height of a credit card. Many older boats have painted numbers that are too small. Measure yours. If they're under 3 inches, they're not compliant even if the number is correct.

My numbers are painted on — can I put vinyl over them?

Yes. Clean the hull surface thoroughly, remove any loose paint, and apply vinyl decals directly over the old numbers. Vinyl actually looks cleaner and lasts longer than paint. Our marine-grade vinyl is rated for 7+ years of saltwater, UV, and weather exposure — far outlasting paint.

I have a Sea-Doo — is it different?

Same rules apply to all motorized pleasure craft over 10 HP (7.5 kW). Sea-Doos, Jet Skis, and WaveRunners all need PCL numbers. The challenge is the curved hull surface — we pre-cut registration numbers into sections for easier application on PWC hulls.

Can I keep my old numbers if the licence number doesn't change?

Technically yes — if the number is identical AND the markings are still clearly legible, properly sized (75mm+), and in a contrasting colour. But if your numbers were applied before 1975, they've had 50+ years of UV, water, and weather exposure. Be honest about their condition. A Coast Guard officer will be.

What happens if my licence expires and I keep boating?

Fine of up to $250 per offence under the Small Vessel Regulations. Coast Guard and RCMP Marine Unit conduct random compliance checks on popular waterways, especially on long weekends and during boating season. An expired licence is the easiest thing for them to spot.

How to Apply Your New PCL Numbers

1

Measure your bow

Measure the space available on both sides of your bow, above the waterline. Note the curvature — flat surfaces are easiest, curved surfaces need pre-cut sections.

2

Clean the surface

Wash with soap and water, then wipe with isopropyl alcohol. Remove any wax, oil, or marine growth. The surface must be completely dry.

3

Position with masking tape

Use masking tape to mark a level line at the desired height. Our decals come pre-spaced and pre-masked — just align the bottom edge with your tape line.

4

Wet application method

Spray a light mist of water with a drop of dish soap on the hull surface. This lets you slide the decal into perfect position before squeegeeing out the water.

5

Squeegee from centre out

Use the included squeegee to push water and air bubbles from the centre outward. Work slowly. Let dry for 24 hours before launching.

6

Verify from 30 metres

Stand 30 metres (100 feet) from your boat. Can you clearly read the number? That's what a Coast Guard officer will check.