Skip to main content

Private Canadian supplier Source-checked against official regulations Not a government agency

Canadian supplier · Not a government agency

Call or text: 289-228-7021
Configure and check outfrom $29.99
5 ordering options
Current CAD pricing
Listed option
Made to order in Canada

Made to order. If a material is delayed, we will contact you before production begins. Ships Canada-wide.

Made to order

Red & White Reflective Trailer Tape Kits

In Canada, conspicuity treatment is required on trailers 2,032 mm (80 in) or more in overall width with a gross vehicle weight rating of 4,536 kg (10,000 lb) or more. Narrower or lighter trailers fall outside that threshold.

From $29.99 CAD
Illustrative red and white reflective tape application on an enclosed trailer

Order this product

Choose your option and check out securely. Fleet or bulk? Request a quote below.

01 Size, material and pack
Prepared to orderCurrent kit configuration
Exact selectionOptions saved with order
Ships Canada-wideDelivery at checkout
Checkout total$29.99
Checkout

Your selected configuration and quantity are saved with the order.

Choose install kit size5 options
Kit Length
Selected optionRepair Strip Kit
$29.99
6 ft
SelectedRepair Strip Kit — 6 ft
Price
$29.99CAD + tax
Quantity
1

Secure checkout. We confirm your order details before production — nothing is cut until it's right.

Product details

In Canada, conspicuity treatment is required on trailers 2,032 mm (80 in) or more in overall width with a gross vehicle weight rating of 4,536 kg (10,000 lb) or more. Narrower or lighter trailers fall outside that threshold.

Those two thresholds are what decide it. Many small utility, cargo and boat trailers sit below them and are outside the requirement entirely.

Regulatory summary

Specification Requirement Legal Reference
Trailers covered (Canada) 2,032 mm (80 in) or more in overall width with GVWR of 4,536 kg (10,000 lb) or more CMVSS 108 (Transport Canada)
Rear upper corners Two pairs of 300 mm white strips CMVSS 108
Rear bumper bar Continuous red and white strip across the full width CMVSS 108
Side markings 375 mm to 1525 mm from the ground, covering at least 50% of the side length; red and white, or optionally solid white or yellow CMVSS 108
Clearance from amber lamps Red conspicuity tape kept at least 75 mm from the edge of any amber lamp CMVSS 108
United States equivalent Trailers 2,032 mm (80 in) or more wide with GVWR over 4,536 kg (10,000 lb), manufactured on or after 1 December 1993 (pole trailers and living or office trailers excluded) 49 CFR 393.11 incorporating FMVSS No. 108 (S5.7)
Last Verified 2026-08-11. Transport Canada trailer lighting equipment location requirements; Cornell Law LII 49 CFR 393.11 CMVSS 108 / 49 CFR 393.11

Who uses these kits

Trailer owners who need to keep conspicuity tape current: utility and cargo trailer owners, boat trailer owners, equipment and flatbed trailer operators, and fleet teams refreshing a group of trailers at once. If your trailer is 2,032 mm (80 in) or more in overall width and has a GVWR of 4,536 kg (10,000 lb) or more, the thresholds in the table above apply to it. Below those thresholds, tape is still a visibility upgrade, but it is not the same requirement.

What is in each kit

  • Red and white conspicuity tape cut to the length of the kit, with the red and white alternating pattern used on trailer rear and side markings.
  • Backing paper and release liner so the tape peels cleanly and the adhesive stays protected until install day.
  • Application squeegee in every kit, so you can smooth the tape flat as you lay it down.
  • Installation guide covering surface prep, corner work, and how to keep tape clear of the amber lamp zones called out in the CMVSS 108 table above.

Choosing a kit length

Kit Best for
Repair Strip Kit, 6 ft Replacing a single torn or faded section on the rear bumper bar or one side run.
10 ft Install Kit Refreshing the rear bumper bar and rear corner strips on a small trailer.
25 ft Trailer Refresh Kit One full trailer: rear bar, rear corners, and both side runs, with a little left over.
50 ft Full Trailer Kit Longer flatbed or equipment trailers, or two smaller trailers.
150 ft Fleet Roll Pack Fleets and shops restocking several trailers at once.

How to install it

  1. Clean the surface. Wash the area, let it dry fully, and wipe off wax or silicone residue. Tape only sticks well to clean, dry metal.
  2. Measure and mark. Lay the tape along the edge and mark where it should start and end before you peel anything.
  3. Peel and position. Hold the release liner back and press the tape down at one end, then smooth it toward the other end with the squeegee.
  4. Work out bubbles. Push from the centre of each section toward the edges. On corners, cut the tape to follow the corner line rather than stretching it.
  5. Keep clear of lamps. The table above sets the clearance from amber lamps. Check your placement against it before you finish.

Material and durability

The tape is red and white reflective film on a pressure-sensitive adhesive backing. It is designed for outdoor use on trailer surfaces and to stay visible in daylight and at night. Weather, UV exposure, road grime and wash-down cycles all shorten the life of any tape over time, so plan to inspect it at least once a year and replace any section that has faded, cracked or lifted. The material product detail on this listing states the same point: verify the material you receive before installation.

FAQ

Does every trailer need reflective tape?

No. In Canada the requirement applies to trailers 2,032 mm (80 in) or more in overall width with a GVWR of 4,536 kg (10,000 lb) or more, under CMVSS 108. Smaller or lighter trailers are below the threshold. Check the table above against your trailer's width and GVWR before you buy.

What if my trailer is under the threshold?

Tape is still a visibility upgrade for any trailer, and many owners add it anyway for night-time visibility. It is a different decision from meeting the requirement, and this listing does not treat it as one.

Will this tape support an inspection preparation?

We cannot say that. Whether a specific installation meets the requirement depends on the tape placement, your trailer's dimensions, and the inspector's assessment. The table above lists the CMVSS 108 specifications so you can compare your trailer against them, and the listing's compliance_standard field asks for buyer verification before installation.

How long does the tape last?

It depends on climate, sun exposure, and how the trailer is washed and stored. Inspect it at least once a year and replace any section that has faded, cracked, or lifted. There is no fixed service life we can promise.

Can I install it myself?

Yes. Every kit includes a squeegee and an installation guide. Most owners complete a full trailer refresh in under an hour with two people.

What sizes do you carry?

Kit lengths run from a 6 ft repair strip up to a 150 ft fleet roll pack. The tape width matches the CMVSS 108 strip dimensions listed in the table above.

Sources

  • Transport Canada, "Trailers: Federal Lighting Equipment Location Requirements" (CMVSS 108). tc.canada.ca
  • Federal Motor Carrier Safety Administration, 49 CFR 393.11 (Cornell Law LII mirror of the eCFR). law.cornell.edu

What this page does and does not claim

This listing makes no government-approval or certification claim of any kind. Under both CMVSS 108 and FMVSS No. 108 the certification and marking obligations sit with the sheeting manufacturer, and the legal outcome depends on the trailer being in scope and on the treatment being placed correctly. Confirm the product received, the eligibility of your trailer, and the current rules in your jurisdiction before installation.

Ready-to-order red and white reflective trailer tape in five length options. No custom text, artwork, or proof is required.

Use these kits for visibility-maintenance work on clean, dry, smooth trailer surfaces. Common applications include cargo, enclosed, equipment, utility, commercial, and boat trailers.

Choose a Length

  • 6 ft Repair Strip Kit. Small replacement sections
  • 10 ft Install Kit. Short rails, posts, and spot maintenance
  • 25 ft Trailer Refresh Kit. Several repair areas or a broader refresh
  • 50 ft Full Trailer Kit. Larger maintenance projects
  • 150 ft Fleet Roll Pack. Multi-unit, shop, or fleet use

Before Installation

  1. Measure the surfaces you plan to cover.
  2. Choose the length that leaves enough material for the planned application.
  3. Remove dirt, oil, road grime, wax, loose paint, rust, and moisture.
  4. Apply slowly to a clean, dry, smooth surface and press firmly.

Avoid wet, oily, rusty, flexible, deeply textured, loose-paint, or moving surfaces.

Buyer Verification

This listing does not determine which marking specification, coverage, pattern, or placement applies to a vehicle. Check the product received and the current rules for your vehicle and jurisdiction before installation. Gallery images are illustrative examples.

Frequently Asked Questions

Which trailers need conspicuity tape in Canada?
Trailers 2,032 mm (80 in) or more in overall width with a GVWR of 4,536 kg (10,000 lb) or more, under CMVSS 108. Trailers below those thresholds are outside the requirement.

Does every trailer need conspicuity tape?
No. Only trailers meeting both the width and the weight threshold are in scope. The thresholds exclude many small utility, cargo and boat trailers.

What is the pattern on the rear of the trailer?
CMVSS 108 describes two pairs of 300 mm white strips at the rear upper corners and a continuous red and white strip across the full width of the rear bumper bar.

How much of the side has to be covered?
Side markings sit 375 mm to 1525 mm from the ground and cover at least half of the side length under CMVSS 108.

Does this listing certify that the tape meets a particular vehicle rule?
No. Certification and marking obligations sit with the sheeting manufacturer. Verify the product received and the rules that apply to your vehicle and jurisdiction before installation.

Which length should I choose?
Measure the areas you plan to cover and select a length that provides enough material. Current options are 6, 10, 25, 50, and 150 ft.

Do I submit artwork or wait for a proof?
No. This is a fixed-format product with no custom text or artwork.

  • Five ready-to-order lengths: 6, 10, 25, 50, and 150 ft.
  • Fixed-format product with no custom text, artwork, or proof.
  • Choose the needed length before checkout; the selected option travels with the order.
  • Gallery images are illustrative; verify the received product and intended application before installation.
Details, sources and buyer questions

The answer in 20 seconds

Red & White Reflective Trailer Tape Kits can be ordered from the current options and CAD prices on this page. The selected option and quantity travel with checkout.

Review required before production or reliance.

Primary source
Source-checked authority

Product source and requirement record

Red & White Reflective Trailer Tape Kits: requirements and their primary sources
SpecificationRequirementPrimary reference
Offer scopeThe page lists the exact orderable configurations and current CAD prices. It does not promise an inspection, approval, or legal outcome.Live product record
Customer informationThe selected product option and quantity define the order.Rendered order contract
Production controlProduction follows the selected listed configuration.Published workflow
Source cited on this pagetc.canada.catc.canada.ca
Last verified Jul 20, 2026 against Live product configuration and page record.

Questions buyers ask

Does this listing certify that the tape meets a particular vehicle rule?

No. Verify the product received and the current rules for your vehicle and jurisdiction before installation.

Which length should I choose?

Measure the areas you plan to cover and select a length that provides enough material. Current options are 6, 10, 25, 50, and 150 ft.

Do I submit artwork or wait for a proof?

No. This is a fixed-format product with no custom text or artwork.

Are the gallery images exact installation instructions?

No. They are illustrative application examples; verify placement and coverage for the specific vehicle and jurisdiction.

Ordering comparison

DecisionThis product pageQuote-first ordering
Price and optionsCurrent CAD prices and orderable options are visible before checkout.Pricing and available configurations are confirmed after an enquiry.
Order informationThe selected product option and quantity travel directly into checkout.Specifications are commonly repeated across messages before an order is opened.
Production controlThe listed configuration defines the product being ordered.Approval and production steps depend on the individual quote workflow.

Last verified Jul 20, 2026 against Live product configuration and page record.

The kit contents and identifiers shown in the proof come from the options and details you approve. Verify every identifier before production.

Customer reviews

This product does not have a published customer rating yet. We only publish ratings from real customer reviews. Use the source-checked specifications, product images and live options to decide.

Know the requirements before you order

Complete the job

Related compliance products

Marking several vehicles, rooms or sites? Keep each design and quantity in one plan.

Multiple locationsDistinct designsExact quantitiesReplacement pieces